This unique scale allows you to pre-set your target weight before you start measuring out ingredients. Its clever interactive display and optional voice feature make it quicker and easier than ever before to get the correct weight and therefore the best results from your recipes.
3 x AA. Ensure +/- terminals are the correct way round.
- If using a bowl, place the bowl on the scale before switching on.
- Touch q button, for 2-3 seconds, until display lights up.
- Wait until display shows 0.
TO CHANGE UNITS
Use the switch on the back edge of the display to select the desired units (kg/g, lb:oz, ml, fl.oz). Kg=kilograms, g= grams, oz = ounces, lb = pounds, ml = millilitres, fl.oz = fluid ounces.
Use the switch on the underside of the scale to turn the voice on and off. The voice gives audible feedback to assist with the weighing process. While adding ingredients, simply pause briefly at any time and the scale will speak the weight to you.
Rotate the “Target Setting Dial” to set the target weight. For example, if your recipe calls for 200g flour, set the target to 200g. Rotate clockwise to increase and counter clockwise to decrease the target value. When you reach the desired value, stop turning and the target weight will pop to the top of the display. The large display will now show the current weight on the scale platform.
Add your ingredients and the graphic around the display will show how close you are getting to target. When you reach target, the display will turn green. If you go over target, it will turn red.
To edit the target weight, simply turn the “Target Setting Dial” at any time.
To clear the target, turn counter-clockwise back to 0.
NOTE: You can also use the scale without setting a target weight. When the weight at the top of the display shows 0, there is no target weight set.
ADD & WEIGH
To weigh several different ingredients in one bowl, swipe or lightly tap q button and wait for the display to zero between each ingredient.
Auto switch off occurs if the display shows 0 for 1 minute or shows the same weight reading for 3 minutes
To maximise the battery life touch the q button, for 5 seconds, on the front of the scale to switch off
Replace battery Weight Overload Scale not on a flat surface
CLEANING AND CARE
- DO NOT immerse the scale in water or use chemical/abrasive cleaning agents.
- All plastic parts should be cleaned immediately after contact with fats, spices, vinegar and strongly flavoured/coloured foods.
- Avoid contact with acids such as citrus juices.
Download Instruction Manual