MiBODY
Salter MiBody is a range of connected devices to make weight and health management easier. Measurements are sent wirelessly to your mobile device and can be viewed using the free to download MiBody App. Trends can be tracked over time and the measurements explained with healthy/recommended ranges. The results are stored on your personal mobile device and are private unless you choose to share your achievements. MiBody should be used in addition to and not as a substitute for professional medical guidance. If you are concerned about any aspect of your health please seek professional medical guidance.
HOW DOES THIS SALTER SCALE WORK?
This Salter scale uses BIA (Bio ImpedanceAnalysis) technology which passes a tiny electrical impulse through the body to determine fat from lean tissue, the electrical impulse cannot be felt and is perfectly safe. Contact with the body is made via a conductive film on the platform of the scale. This method simultaneously calculates your personal weight, body fat, total bodywater, BMI, Basal Metabolic Rate, bone mass and muscle mass, giving you a more accurate reading of your overall health and fitness. This scale stores the personal data of up to 8 users. As well as being an analyser scale, this scale can be used as a conventional scale.
PREPARING YOUR SCALE
- Open the battery compartment on the scale underside.
- Remove isolating tab from beneath the battery (if fitted) or insert batteries observing the polarity signs (+ and -) inside the battery compartment.
- Close the battery compartment.
- Select kg, st or lb weight mode by the switch on the underside of the scale.
- For use on carpet remove the non-slip pads from the scales feet and attach enclosed carpet feet.
- Position scale on a firm flat surface.
MiBODY APP
Before using your device for the first time:
- Download and install the Salter MiBody App from the App store. Use keyword search terms “Salter” or “MiBody”.
- Turn Bluetooth “On” in the “Settings” menu of your mobile device.
- Open the MiBody App and follow the on screen instructions to set up your user account.
PAIRING DEVICES
- Turn Bluetooth “On” in the “Settings” menu of your mobile device.
- Open the MiBody App.
- Press the | button.
- Press “Add Device”.
- Press the scale to turn on the scale.
- The App should automatically find the scale. If not, just press the refresh button to find the scale.
- Once found, Select the user number you wish to pair. Touch the OK button to finish.
- If pairing is successful, the user number will flash and cycle through the user details on the scale.
- If pairing is unsuccessful an error will be displayed.
- The scale will automatically switch off.
- Repeat procedure for each user and each mobile device.
Note: Each user profile can only be paired with one mobile device. Results will be sent to the paired device only.
INITIALISING YOUR SCALE
- Press the platform centre and remove your foot.
- ‘0.0’ will be displayed.
- The scale will switch off and is now ready for use.
This initialisation process must be repeated if the scale is moved. At all other times step straight on the scale.
WEIGHT READING ONLY
This scale features our convenient step-on operation. Once initialised the scale can be operated by simply stepping straight on the platform – no more waiting!
- Step on and stand very still while the scale computes your weight.
- Your weight is displayed.
- Step off. Your weight will be displayed for a few seconds.
- The scale will switch off.